1HD-FTE GU Patrol Engine Mounts

1HD-FTE GU Patrol Engine Mounts

Engine mounts designed to allow you to put a 1H engine into a Nissan Patrol. These mounts are 100% designed and manufactured here in Australia from 6mm folded steel. This is a complete set of LH and RH mounts, complete with 2 gussets per side!

Designed to suit the standard rubber 1HD-FTE engine mounts found on HZJ105/HZJ80/FZJ105/FZJ80.

Most engines for conversions are from 100 Series HDJ100 LandCruisers. The LH factory block mount stays the same and the RH factory block mount will need to be swapped for a 1HZ HZJ105 / HZJ79 factory block mount. We sell this on our website or can be purchased online from a number of shops. This ensure correct engine and mount spacing in a Patrol engine bay.

If your engine is from a HDJ79, the LH factory block mount will need to be swapped for a HDJ100 factory block mount, or the mount will hit on the engine.

Some features include:

• 6mm CNC bent steel
• Twin gussets under each mount
• Multiple slots for plug welds (for that extra bit of strength)
• LH and RH mounts designed to self-locate on the chassis, setting the engine position to the typical mounting height
• Can also be used for installing a 1HZ/1HD-T/1HD-FT and 1FZ engine into a patrol

Optional:

HyperFab 1HZ RH side engine bracket & rubber mounts (required when using a 100 series conversion engine, as the RH HDJ100 block-side engine mount has to be swapped to the 1HZ one for proper fitment.

NOTE: This is a weld-in part and should only be installed by competent fabricators/mechanics. As with any custom engine conversion, every setup is different and as such, this part may need to be modified to suit your specific setup or application. These have been made to work in a GQ chassis. WE NOW SUPPLY OUR OWN HEAVY DUTY ‘1HZ RH ENGINE MOUNT’ INSTEAD OF A CAST FACTORY STYLE.