1HZ / 1HD-T Forward Facing Intake Manifold

1HZ / 1HD-T Forward Facing Intake Manifold

These intake manifolds utilise the lower half of the factory intake. We require your intake manifold to complete the work. Please send us your intake with your order number (after purchasing) and we will modify it and send it back. Typically this takes 1-2 weeks depending on cleaning, welding and powder-coating lead times.

YOUR INTAKE & THROTTLE LINKAGE MUST BE SENT TO: 1/3 Page Street, Kunda Park, 4556. With a copy of your name & order number.

Folded aluminium sheet metal intake, designed to replace the small displacement, factory cast, centre/crossover feed. Tapered back from the inlet side to cylinder 6, this intake provides maximum air distribution, looks great & reduces cooler piping length & joins.

Retains factory throttle linkage on the side of the intake. Retains factory throttle cable mount. YOUR THROTTLE LINKAGE MUST BE SENT IN WITH YOUR INTAKE SO THAT IT CAN BE MODIFIED TO CLEAR THE TOP OF THE INTAKE.

Features:

• Intake is tapered towards the rear for maximum airflow distribution
• 2.5″ inlet with maximum possible intake volume without interfering with the factory injector lines & mounts
• Retains all factory injector line clamps/mounts
• 2 x 1/8NPT ports for Boost Gauge Reference etc.
• Larger internal displacement than factory
• Welded in a jig & machined flat to ensure 100% perfectly flat flange surface even after modification

Before we can perform any welding work on your intake manifold, it must be thoroughly cleaned of all carbon build-up, sludge, and oil deposits. Dirty manifolds can significantly compromise weld quality. If your intake manifold arrives uncleaned, we will need to send it to be cleaned which will be done so at your cost. To avoid additional charges and delays, we strongly recommend that customers properly clean their intake manifold before sending it in to us.

WE REQUIRE YOUR FACTORY INTAKE TO COMPLETE THE WORK. PLEASE READ THE LISTING DESCRIPTION PRIOR TO ORDERING. NO REFUNDS WILL BE ISSUED FOR FAILING TO READ THE PRODUCT DESCRIPTION & NOT SENDING YOUR INTAKE MANIFOLD IN TO US!

This is an aftermarket part, manufactured by HyperFab and is not designed to replicate a genuine replacement part.