1HD-FT Forward Facing Intake Manifold

1HD-FT Forward Facing Intake Manifold

Your factory intake manifold is modified to have a forward facing inlet.

WE WILL REQUIRE YOUR INTAKE TO MODIFY. INTAKES MUST BE SENT TO 1/3 PAGE STREET, KUNDA PARK, 4556, WITH A COPY OF YOUR ORDER. NO REFUNDS WILL BE ISSUED FOR FAILING TO READ THE DESCRIPTION AND NOT SENDING YOUR INTAKE IN.

This intake is especially for the Toyota 1HD-FT Engine. If you have a 1HD-FTE engine, please see our dedicated 1HD-FTE listing.

These intakes incorporate the injector line clamps into the top section of the manifold. When we modify these intakes, we use a jig to align the injector hold-down mounts & throttle cable mount in the same spot as factory.

Features:

• 3″ inlet with maximum possible intake volume without interfering with the factory injector lines & mounts
• Retains all factory injector line clamps/mounts
• Port for boost reference.
• Larger internal displacement than factory
• Welded in a jig to ensure 100% perfectly flat mating surface even after modification
• OPTIONAL Powder-coating.

These intake manifolds utilise the lower half of the factory intake. We require your intake manifold to complete the work. Please send us your intake with your order number (after purchasing) and we will modify it and send it back. Typically this takes 1-2 weeks depending on cleaning, welding and powder-coating lead times.

Before we can perform any welding work on your intake manifold, it must be thoroughly cleaned of all carbon build-up, sludge, and oil deposits. Dirty manifolds can significantly compromise weld quality. If your intake manifold arrives uncleaned, we will need to send it to be cleaned which will be done so at your cost. To avoid additional charges and delays, we strongly recommend that customers properly clean their intake manifold before sending it in to us.

This is an aftermarket part, manufactured by HyperFab and is not designed to replicate a genuine replacement part.